Documented drain cleaning programs are available. Properly labeled, stored, and restricted supplies and PPE are used. Cleaning drains in production areas during production should be avoided and always completed before cleaning equipment to avoid potential
Floor/equipment junctions are mounted, grouted in place and are accessible for cleaning. Equipment legs are designed to minimize moisture entrapment (no hollow tubing). Other equipment has solid pin legs with a rounded tip to minimize
Floors are sloped 1/4 inch / foot, smooth and self-draining, are dry. If floors are not perfectly self-draining, they are easily drained with squeegees. Wet areas are clean and may be wet with sanitizer, with
Floor drains are circular and not directly under equipment or processes (or covered during production). Easily accessible and cleaned during each sanitation cycle or sanitized daily. Level with floor surface and of sufficient size and
A floor maintenance programs exists and is followed for floor inspection and maintenance. A process for creating work orders to repair or replace floors is in place and used.
Floors are generally cleanable, non-porous and show no cracks. By design, floors are resistant to chemicals used. Floor/wall junctions are completely sealed. Concrete base sealed with epoxy or urethane material which is chemically resistant or
For all media inquiries, please contact:
Mary Emma Young
Vice President of Communications
meyoung@affi.com
443-904-3937
Tel: (703) 821.0770
Email: info@affi.com